Texecom Intruder Alarm Servicing and Maintenance in Leamington Spa
Security Fix provides professional Texecom alarm servicing in Leamington Spa for homeowners, landlords and businesses.
We service Texecom Premier Elite, Ricochet wireless and wired Texecom intruder alarm systems, including systems originally installed by other alarm companies.
A security alarm needs more than an occasional battery change. During a proper service, the complete system should be checked so that weak batteries, damaged sensors, communication problems and other faults can be identified.
Comprehensive Texecom Alarm Servicing
Our Texecom service is designed to check the condition and operation of your alarm rather than simply confirming that it can set and unset.
Depending on the system installed, we can inspect and test:
• Alarm control panel
• Main standby battery
• PIR movement detectors
• Door and window contacts
• Shock sensors
• Wireless Ricochet devices
• Internal sounders
• External bell box
• Tamper protection
• Entry and exit operation
• System faults and warnings
• Event history
• SmartCom connectivity where fitted
Control Panel Inspection
The Texecom control panel is checked for correct operation and any visible signs of problems.
Applicable checks include mains power status, system faults, zone conditions, tamper protection and the condition of accessible equipment.
We also check the system date and time and review relevant information stored within the panel.
Main Standby Battery Testing
The rechargeable battery inside the alarm panel is an important part of the system.
If mains electricity fails, this battery provides temporary standby power to keep the alarm operating.
During servicing we check its condition and, where appropriate, assess its performance.
A voltage reading alone doesn’t necessarily prove that an older battery still has adequate capacity.
If testing or its condition indicates that replacement is appropriate, we’ll advise you.
Texecom Wireless Battery Checks
Texecom Ricochet systems can contain several battery powered devices.
Depending on the installation, these may include:
• Wireless PIR detectors
• Door contacts
• Shock sensors
• Combined contact and shock sensors
• Wireless keypads
• Wireless external sounders
• Other compatible Ricochet equipment
We check for applicable low battery warnings and device faults.
Different Texecom products can use different batteries, so the correct replacement battery is selected according to the actual device installed.
After battery replacement, the device is tested again to confirm correct operation.
PIR Detector Testing and Cleaning
PIR movement detectors are an important part of many intruder alarm systems.
Accessible detectors are inspected for:
• Physical damage
• Dirt and dust
• Obstruction
• Loose mounting
• Tamper problems
• Incorrect operation
• Changes within the room that may affect coverage
Where appropriate, detectors are cleaned and operationally tested.
Wireless PIRs are also checked for relevant battery and communication problems.
Door and Window Contact Testing
Door and window contacts can become damaged or move out of alignment.
This can happen when doors drop slightly, frames move or building work is carried out.
Applicable contacts are tested to confirm that the alarm correctly recognises when the protected opening is operated.
Wireless contacts are also checked for applicable battery and communication issues.
Shock Sensor Checks
Where Texecom shock sensors are installed, applicable devices are checked for condition and operation.
For wireless devices, we also check for relevant battery, tamper and communication warnings.
Wired Texecom Alarm Systems
Wired Texecom alarms don’t normally require disposable batteries inside every PIR or contact.
However, the detectors, circuits and control equipment still require regular inspection.
Applicable checks can include:
• PIR operation
• Door contacts
• Zone operation
• Tamper circuits
• Detector condition
• Obstructed sensors
• Loose equipment
• Visible cable damage
• Panel battery condition
Any equipment that doesn’t respond correctly can then be investigated.
External Bell Box Testing
Where appropriate and safely accessible, the external alarm sounder is checked for correct operation and condition.
Relevant sounder, tamper or battery faults reported by the system can also be investigated.
Internal Sounders
Applicable internal sounders are tested to confirm correct operation.
Sounder problems aren’t always noticeable during normal use because the alarm can continue setting and unsetting without activating them.
Texecom Ricochet Communication
A wireless alarm depends on reliable communication between its devices.
We check for relevant Ricochet communication problems and device warnings reported by the system.
Repeated communication faults should be investigated rather than simply cleared from the keypad.
Alarm Setting, Unsetting and Entry Routes
The normal setting and unsetting operation of the system is tested.
Applicable entry and exit functions are also checked.
Where the system uses part sets or separately protected areas, these can be tested as appropriate to the installation.
Texecom SmartCom
If Texecom SmartCom and supported remote connectivity are installed, the communication status can also be checked.
Connectivity problems can be investigated as part of the service or a separate fault finding visit.
Alarm Event Log Review
Where appropriate, we review recent system events.
The event history can reveal problems such as:
• Low battery conditions
• Mains failures
• Tamper activations
• Detector faults
• Zone problems
• Communication issues
• Alarm activations
Repeated events can help identify intermittent faults that may otherwise be difficult to find.
Checking the Physical Condition of the Alarm
Properties change after an alarm has been installed.
Furniture moves, shelving is installed, doors are replaced and rooms are altered.
During servicing we look at accessible equipment for obvious damage, contamination and obstruction.
Where appropriate, detectors are cleaned.
We also consider whether changes within the property could be affecting detector coverage or operation.
Texecom Alarm Battery Replacement Leamington Spa
A low battery warning shouldn’t simply be cleared and forgotten.
Security Fix can identify the affected Texecom device, fit the appropriate replacement battery and test the device afterwards.
We can replace batteries in applicable wireless Texecom devices and check the rechargeable standby battery inside the main control panel.
If several wireless batteries are ageing, we can discuss the most sensible replacement approach with you.
Texecom Alarm Repairs in Leamington Spa
We can also investigate Texecom alarm faults, including:
• Low battery warnings
• PIR faults
• Door contact problems
• Shock sensor faults
• Tamper warnings
• Bell box problems
• Wireless communication issues
• Panel battery problems
• SmartCom problems
• Setting and unsetting faults
• Unexplained alarm activations
• General system faults
Where additional parts or repairs are required, we’ll explain what we’ve found and discuss the required work.
How Often Should Your Texecom Alarm Be Serviced?
For many residential and small commercial installations, having the alarm professionally checked annually provides a sensible maintenance schedule.
Individual requirements can vary according to the type of installation, property use and any applicable maintenance or insurance conditions.
Don’t wait until the next annual service if the system develops a fault or displays a low battery warning.
Texecom Servicing for Homes, Landlords and Businesses
Security Fix provides Texecom servicing for properties across Leamington Spa, including:
• Homes
• HMOs
• Rental properties
• Shops
• Offices
• Workshops
• Warehouses
• Commercial premises
Your Texecom alarm doesn’t have to have been installed by Security Fix. We can discuss taking over the maintenance of an existing system.
Book a Texecom Alarm Service in Leamington Spa
If your Texecom alarm is due for servicing, displaying a battery warning or experiencing a fault, contact Security Fix.
We provide Texecom alarm servicing, maintenance, battery replacement and fault finding in Leamington Spa and surrounding areas.
Security Fix Limited
Telephone: 02476 26 76 82
Contact us to arrange your Texecom alarm service.